FOG is a Linux-based, free and open source computer imaging solution for Windows XP, Vista and 7 that ties together a few open-source tools with a php-based web interface. FOG doesn’t use any boot disks, or CDs; everything is done via TFTP and PXE. Also with fog many drivers are built into the kernel, so you don’t really need to worry about drivers (unless there isn’t a linux kernel driver for it). FOG also supports putting an image that came from a computer with a 80GB partition onto a machine with a 40GB hard drive as long as the data is less than 40GB.
FOG is centralized. Most of tasks done on FOG don’t require the user to visit the client PC. For example if you imaging a computer all you need to do is start the task. After the task is started WOL will turn the computer on if it is off, PXE will load the OS, DHCP will give it an IP address, FOG will tell the server it is in progess, and PartImage will image your computer. Then when imaging is done FOG will tell PXE not to boot the machine to the fog image and your computer boots up. After the computer is booted, if the FOG service is installed, FOG will change the computer’s hostname and that computer is ready to use!